Third party AP support

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi guys

I have configured a physical interface for third party AP's as per the attached screenshot.

I then create the Wlan 3rd party service but am a bit lost as to how this mapps to a outbound topology.

I currently have 2 ISP's connected to esa1 on different vlans.
I would like to map the thrid party AP's traffic to one of the ISP vlans.

With a normal WLAN service I can set the B@HWC topology af default or apply a role that B@HWC.

With the third party WLAN you can not assign a topology.

Any assistance on how the thrid party AP works and how to configure it.

Thx

Andre
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,214 Points 5k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,214 Points 5k badge 2x thumb
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
Photo of Umut Aydin

Umut Aydin, Escalation Support Engineer

  • 2,290 Points 2k badge 2x thumb
Via a third party VNS you can apply access rules/filters to wireless traffic running over a parallel wireless network but our controllers do not manage non-EXTR APs