Top AP information in Extreme Management (Netsight)

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi Community

Perhaps someone can shed some light on the following



In Netsight on the Wireless Management Page it lists the TOP AP's for a specific Date.
If we look at the Peak Wireless Bandwidth vs the Peak Wired Bandwidth.
Surely if we push 230Mbs in on the wireless we should see the same on the Ethernet side? (or close to it)

If we look at the second AP it is 229 Mbs on wireless vs 261 Kbs on wired....

This does not look right unless I am reading it wrong.
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,350 Points 5k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Nick Yakimenko

Nick Yakimenko

  • 2,518 Points 2k badge 2x thumb
Is it possible that the AP's are connected wirelessly and the traffic flows between them without wires?
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,350 Points 5k badge 2x thumb
Hi Nick

No these AP's are connected to a LAN and all the SSID's use either B@AP or B@HWC, no mesh is configured
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,350 Points 5k badge 2x thumb
At another client (Completely different site) I see the same type of reports

Photo of Joshua Puusep

Joshua Puusep

  • 2,394 Points 2k badge 2x thumb
Ours looks more normal.  We are running Netsight 7.0.9.4 with EWC 10.11.05.0005 in a bridged at controller config.
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,350 Points 5k badge 2x thumb
At both sites we are running 10.31 on the controllers and 7.1 for netsight.
That being said i have some ssid's configured as bridge at ap and other to bridge at controller.