Topology MAP to show AP's

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
How can we display AP's in the netsight topology AP?
When I discover the Topology MAP it only displays the controller and switches, not the AP's and where they are connected in the network.
If we set the AP's to be discovered via LLDP (On the controller) we also do not see them on the Topology MAP.

Regards
Photo of Andre Brits Kannemeyer

Andre Brits Kannemeyer

  • 5,330 Points 5k badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,164 Points 50k badge 2x thumb
Official Response
I think that is correct as they don't count as an "device" - in Netsight Console you also have only the switches and the controller listed correct ?

As the AP has no SNMP agent running you can't discover them as a SNMP device.

If you use NAC in your network you'd use OneView to see were everything is connected to.
In the example below I search for the AP name and I'd see the switch port, the home controller, NAC that was used to authenticate the AP.