cancel
Showing results for 
Search instead for 
Did you mean: 

Tracking DFS radar events

Tracking DFS radar events

James_A
Valued Contributor
Is there a way to get all of the DFS Radar events that cause APs to change channel? I'm trying out a 40MHz-wide 5GHz channel plan with DFS channels, and I've noticed them happening (thanks to the "ch 100" changing to "ch 60" in the config). I can also view them by going to the AP log on the controller, but I'd have to do that one by one, which is not so great with 180 APs.

It'd also be good to aggregate the DCS monitor reports so I can view them all at once. And maybe a way to report on APs with different ch and ch_req in the configuration.

The new Nearby AP report in 9.21 has been a godsend in terms of channel planning, so thanks for that.
5 REPLIES 5

Doug
Extreme Employee
Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-an-email-notification-for-DF...
Doug Hyde
Director, Technical Support / Extreme Networks

Ostrovsky__Yury
Extreme Employee
Hello James. Since 9.21 any DFS event sent out , so if you using NMS (or any other snmp management system) you can configure email or other form of notification. Here is example of what notification I am getting from my NetSight in case of DFS event : Subject: NetSight Warning Alarm: AP DFS Channel Timeout Device: Severity: Warning Message: EWC[212.54.150.118]: AP Serial Number 1225009790410000: 06/29/15 16:29:54: Radar found on channel 5500Mhz

James , Jeremy , I just made a small doc step-by-step how you can create DFS notification with OneView - please see it here
How to create an email notification for DFS Events in NetSight
Let me know if you have any problem getting such email notification

Well hello Yury! I was just wondering the same thing. So thanks for this!
GTM-P2G8KFN