cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to upgrade a x440 using the bootRom

Trying to upgrade a x440 using the bootRom

Carlos_Maldona1
New Contributor
Trying to upgrade the image from 15.3.1 to 16.1.1.4 through the bootRom but I keep getting a message saying that this is not a recovery image or it might be corrupted. I have tried different xos but with thw same results.
4 REPLIES 4

Carlos_Maldona1
New Contributor
I'm using first the command configip address 192.168.1.100/24 gateway 192.168.1.10 and then download image 192,168,1,10 summitX-16.1.1.4.xos

I'm new with the extreme so if there is a better way let me know.

Thanks, got it working

Drew_C
Valued Contributor III
Welcome to Extreme (and The Hub)!
Take a look at this article: How to Obtain and Upgrade EXOS It will help explain the normal way to upgrade.
The BootROM method will erase all config on the switch, which you probably don't want to happen.

Drew_C
Valued Contributor III
Hi Carlos,
What is the command and filename you're using in the BootROM? I'm also curious to know the reason you're using the bootrom method and not upgrading from within EXOS?
GTM-P2G8KFN