cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to Del IPmc sender entry

Unable to Del IPmc sender entry

Narender_kumar
New Contributor
after changing slot 2 in stack i can see below error . please let me know how to stop these error.

can i use disable igmp snooping on perticular vlan ...

Unable to Del IPmc sender entry

Slot-1 VKIBCSW02.1 > show log severity error
01/12/2016 19:17:13.56 Slot-2: IPmc sender entry s,G,v=0,e0000012,3004 IPMC 0 was not added to all switching resources rc -21
01/12/2016 19:17:13.53 Slot-2: Unable to Del IPmc sender entry s,G,v=0,e0000012,3004 IPMC 0 flags 2 unit 1, Entry not found
01/12/2016 19:17:07.22 Slot-2: IPmc sender entry s,G,v=0,e0000012,103 IPMC 2 was not added to all switching resources rc -21
01/12/2016 19:17:07.00 Slot-2: Unable to Del IPmc sender entry s,G,v=0,e0000012,103 IPMC 2 flags 2 unit 1, Entry not found
01/12/2016 19:17:06.31 Slot-2: IPmc sender entry s,G,v=0,e0000012,109 IPMC 1 was not added to all switching resources rc -21
01/12/2016 19:17:06.02 Slot-2: Unable to Del IPmc sender entry s,G,v=0,e0000012,109 IPMC 1 flags 2 unit 1, Entry not found
01/12/2016 19:15:48.06 Slot-2: IPmc sender entry s,G,v=0,e0000012,3004 IPMC 0 was not added to all switching resources rc -21
01/12/2016 19:15:48.00 Slot-2: Unable to Del IPmc sender entry s,G,v=0,e0000012,3004 IPMC 0 flags 2 unit 1, Entry not found
01/12/2016 19:15:41.12 Slot-2: IPmc sender entry s,G,v=0,e0000012,103 IPMC 2 was not added to all switching resources rc -21
01/12/2016 19:15:41.09 Slot-2: Unable to Del IPmc sender entry s,G,v=0,e0000012,103 IPMC 2 flags 2 unit 1, Entry not found
01/12/2016 19:15:39.60 Slot-2: IPmc sender entry s,G,v=0,e0000012,109 IPMC 1 was not added to all switching resources rc -21

Version & stack info given below

Slot-1 VKIBCSW02.2 > show stacking
Stack Topology is a Ring
Active Topology is a Ring
Node MAC Address Slot Stack State Role Flags
------------------ ---- ----------- ------- ---
*00:04:96:37:11:b5 1 Active Master CA-
00:04:96:35:16:2a 2 Active Backup CA-
* - Indicates this node
Flags: (C) Candidate for this active topology, (A) Active Node
(O) node may be in Other active topology
Slot-1 VKIBCSW02.3 > show version
Slot-1 : 800302-00-01 1007G-80144 Rev 1.0 BootROM: 1.0.3.5 IMG: 15.3.1.4
Slot-2 : 800163-00-11 0822G-80687 Rev 11.0 BootROM: 1.0.5.7 IMG: 15.3.1.4
Slot-3 :
Slot-4 :
Slot-5 :
Slot-6 :
Slot-7 :
Slot-8 :
XGM2-2sf-2 : 800254-00-03 1045G-00282 Rev 3.0

Image : ExtremeXOS version 15.3.1.4 v1531b4-patch1-33 by release-manager
on Thu Mar 20 12:43:39 EDT 2014
BootROM : 1.0.3.5

1 REPLY 1

Kawawa
Extreme Employee
Hi Narender, here's an article from our Knowledgebase that could be the issue you're experiencing: https://gtacknowledge.extremenetworks.com/articles/Solution/Unable-to-Add-L2

A firmware upgrade would be a good place to start. For the X450 stack you have, EXOS 15.3.5.2-patch1-8
GTM-P2G8KFN