Unable to delete ports from the default vlan on newly stacked switch

  • 0
  • 2
  • Problem
  • Updated 3 years ago
  • Solved
I added an additional switch to a stack, and am unable to delete any ports from the default vlan.

Here is the command and the error:
configure vlan "Default" delete port 5:1
Error: No valid port(s) in the specified "taggedPorts" value "5:1".
Configuration failed on backup Node, command execution aborted!

Switch info: Summit X460-48T
Current image: 15.5.2.9-patch1-5

For adding the switch to the stack, I used the steps on this page: http://www.base64.co.nz/adding-an-extreme-switch-to-an-existing-stack/

The command works if i change the port to a port on a node that was already in the stack. The issue seems to be with just the new node.

Any help is appreciated.
Photo of Andrew Neussendorfer

Andrew Neussendorfer

  • 90 Points 75 badge 2x thumb
  • confused

Posted 3 years ago

  • 0
  • 2
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Official Response
It depends on how you added the switch to the stack.  The best way to resolve is to make sure you synchronize the slot in the stack... run a "synchronize stacking slot <slot #>"  it will reboot and effectively clean out stacking and make it default. Try that and let me know...