Unable to get Policy to work in EXOS 16.1

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Do you tested it ? . When I have added to policy manager summit switch and enable 802.1x/MAC authentication on switch and on port. The NAC doesn't see end system. I must prepare special config on switch ?

Note: This conversation was created from a reply on: EXOS 16.1 Releases with New Hardware and Role-based Policy Support!.
Photo of Jarek Sobieszek

Jarek Sobieszek

  • 174 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Tyler Marcotte

Tyler Marcotte, Official Rep

  • 2,818 Points 2k badge 2x thumb
Hi Jarek,

A few items that you will want to make sure are set properly.
  1. Make sure that the device has authentication turned on for both the device and port
  2. If the switch is using VR-Mgmt, that needs to be specified when adding it to NAC
  3. If using MAC Authentication, the command 'configure netlogin add mac-list default' needs to be added so that all MAC authentication requests are sent to NAC.
Let me know if that helps at all.