cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Unconfigure switch question

Unconfigure switch question

christopher_mad
New Contributor
I have a 460 with a core licence, that i plan to reset to factory settings and re-configure does the command: unconfigure switch remove the licencing
4 REPLIES 4

Hernandez__Josh
Extreme Employee
Christopher, unconfigure switch all will not remove the license. It is stored in the eeprom chip and has to be cleared using another command. However the command should be used in conjunction with an extreme networks representative. If you wish to continue see the info, beginning on page 152 at this link http://documentation.extremenetworks.com/exos_commands/downloads/EXOS_Command_Reference_15_7.pdf

Alexandr_P
Valued Contributor
Don't remove

Paul_Russo
Extreme Employee
Hello Christopher no the unconfigure switch all just removes the configuration. The license is added to the bootrom and will stay with the switch

Hope that helps

P

Paul_Thornton
New Contributor III
If you want to reset the whole switch to factory defaults, log on and use the command:

unconfig switch all

However, you'll obviously need a console cable connected to re-configure it, as any IP addresses on there will be wiped (including the Mgmt interface).

GTM-P2G8KFN