under XOS ver 15.5.x the TCL clock function was fail

  • 0
  • 1
  • Problem
  • Updated 11 months ago
  • Solved

ena cli script

set var a $TCL(cleck seconds)

In Xos ver 15.5... it display

Error:invalid command name "uplevel".

I think this is Xos bug

Photo of Helpme


  • 260 Points 250 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Thanks Helpme

Can I ask you to please open a case with TAC so we can get it registered as a bug.  I was able to verify that it is not working in 15.5 but was working in 15.4

Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
Its looks like bug in 15.5
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
We have PD PD4-4624312471 regarding the issue.

It is not been resolved yet.
Hello, is anyone aware if this bug has been resolved
Photo of Drew C.

Drew C., Community Manager

  • 35,980 Points 20k badge 2x thumb
It looks like this issue was resolved under CR xos0055958 in all patch releases of
Still experiencing the error in version

* CABJ-DC-CHA-SW10.5 # show switch

SysName:          C
SysContact:       support@extremenetworks.com, +1 888 257 3000
System MAC:       00:04:96:97:94:B8
System Type:      X460-48t

SysHealth check:  Enabled (Normal)
Recovery Mode:    All
System Watchdog:  Enabled

Current Time:     Wed Apr 19 16:30:38 2017
Timezone:         [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time:        Thu Feb  9 07:38:37 2017
Boot Count:       1
Next Reboot:      None scheduled
System UpTime:    69 days 8 hours 52 minutes 1 second

Current State:    OPERATIONAL             
Image Selected:   primary                 
Image Booted:     primary                 
Primary ver:                
Secondary ver:    

Config Selected:  primary.cfg                                          
Config Booted:    Factory Default                                      

primary.cfg       Created by ExtremeXOS version
                  248841 bytes saved on Wed Apr 19 16:01:50 2017

* CA .2 # enable cli scripting
* CA .3 # set var seconds $TCL(clock seconds)
* CA .4 # set var date $TCL(clock format $seconds -format {%Y-%m-%d})
Error:invalid command name "file"
and also in a