untagged vlan configuration on securestack b2

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Hello Extreme Forum,

I want to create 2 untagged VLANs on an SecureStack B2.
The ports 1-32 + 47-48 should be used by the office net.
In this case I use VLAN 1.
Everything works fine, I can connect to the other stations.
Ports 33-46 should be used in as GuestWiFi (VLAN 2).
When I connect 2 or more devices in the ports 33-46, no communication is possible.
I can't ping or connect.

VLAN 1 and VLAN 2 should be separated as untagged ports.
There is no need to communicat between both VLANs.

Here one more what is the configuration:

Static List:
1     Default         Enabled
2     GuestWIFI     Enabled

VLAN Static Table
1        Default
        Egress     ge.1.1-32, ge.1.47-48
        Forbidden Egress    
        Untagged     ge.1.1-32, ge.1.47-48
2        GuestWIFI
        Egress     ge.1.33-46
        Forbidden Egress    
        Untagged     ge.1.33-46

Where do I have the mistake?

thanks Martin
Photo of Martin Mietke

Martin Mietke

  • 90 Points 75 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,226 Points 50k badge 2x thumb
plaese provide a screeshot of the output for "show vlan portinfo"
Photo of Martin Mietke

Martin Mietke

  • 90 Points 75 badge 2x thumb
Hello Ronald,

 Port           VLAN      Ingress   Egress
                          Filter     Vlan
-----------------------------------------------------------------
ge.1.1         1          N          untagged: 1
ge.1.2         1          N          untagged: 1
ge.1.3         1          N          untagged: 1
ge.1.4         1          N          untagged: 1
ge.1.5         1          N          untagged: 1
ge.1.6         1          N          untagged: 1
ge.1.7         1          N          untagged: 1
ge.1.8         1          N          untagged: 1
ge.1.9         1          N          untagged: 1
ge.1.10        1          N          untagged: 1
ge.1.11        1          N          untagged: 1
ge.1.12        1          N          untagged: 1
ge.1.13        1          N          untagged: 1
ge.1.14        1          N          untagged: 1
ge.1.15        1          N          untagged: 1
ge.1.16        1          N          untagged: 1
ge.1.17        1          N          untagged: 1
ge.1.18        1          N          untagged: 1
ge.1.19        1          N          untagged: 1
ge.1.20        1          N          untagged: 1
ge.1.21        1          N          untagged: 1
ge.1.22        1          N          untagged: 1
ge.1.23        1          N          untagged: 1
ge.1.24        1          N          untagged: 1
ge.1.25        1          N          untagged: 1
ge.1.26        1          N          untagged: 1
ge.1.27        1          N          untagged: 1
ge.1.28        1          N          untagged: 1
ge.1.29        1          N          untagged: 1
ge.1.30        1          N          untagged: 1
ge.1.31        1          N          untagged: 1
ge.1.32        1          N          untagged: 1
ge.1.33        1          N          untagged: 2
ge.1.34        1          N          untagged: 2
ge.1.35        1          N          untagged: 2
ge.1.36        1          N          untagged: 2
ge.1.37        1          N          untagged: 2
ge.1.38        1          N          untagged: 2
ge.1.39        1          N          untagged: 2
ge.1.40        1          N          untagged: 2
ge.1.41        1          N          untagged: 2
ge.1.42        1          N          untagged: 2
ge.1.43        1          N          untagged: 2
ge.1.44        1          N          untagged: 2
ge.1.45        1          N          untagged: 2
ge.1.46        1          N          untagged: 2
ge.1.47        1          N          untagged: 1
ge.1.48        1          N          untagged: 1
lag.0.1        1          N
lag.0.2        1          N
lag.0.3        1          N
lag.0.4        1          N
lag.0.5        1          N
lag.0.6        1          N

I've tried to configure the VLANs with the Web-Interface.

thx. Martin
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,226 Points 50k badge 2x thumb
Let's start with the obvious.... that's not a screenshot :-)

The second thing is that ge.1.33-46 should show VLAN #2 in the VLAN column.

Conclusion: wrong configuration

Solution:
# set port vlan ge.1.33-46 2 modify-egress
# save config

-Ron
(Edited)
Photo of Martin Mietke

Martin Mietke

  • 90 Points 75 badge 2x thumb
Hey Ron,

thanks ... this was the solution.
Next time I'll not waste time with the web-interface.

Martin
Photo of Curtis Parish

Curtis Parish

  • 3,332 Points 3k badge 2x thumb
Web interface is fine but you have to set both the VLAN egress and the port vlan.