Upgrading EXOS and SSH together

  • 0
  • 4
  • Article
  • Updated 4 years ago
  • (Edited)
A simple procedure for upgrading EXOS and other .xmod modules, such as SSH, at the same time using the CLI from an existing console/telnet/ssh session:

Enter the CLI command:
show switch | include "Image Booted"
It should be either primary or secondary.

For this example, let's assume it says:
	Image Booted:     primary
Download the .xos image first, followed by any .xmod images to the inactive partition
download image  .xos secondary
download image .xmod secondary
...
reboot
After reboot the new EXOS image and .xmod are running.

Summit example:
show switch | include "Image Booted"
Image Booted: primary
download image 10.10.10.1 summitX-15.7.1.4.xos secondary
download image 10.10.10.1 summitX-15.7.1.4-ssh.xmod secondary
reboot
Photo of Dave Hammers

Dave Hammers, Dir SW Engineering

  • 3,622 Points 3k badge 2x thumb

Posted 4 years ago

  • 0
  • 4

Be the first to post a reply!