cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrading firmware with an EAPS ring

Upgrading firmware with an EAPS ring

DH1
New Contributor III
I have to upgrade the firmware on 3 switches that have an EAPS ring running on them. When I reboot the switch will the ring just failover and then complete once the switch is back up? Are there any special considerations I should be aware of?
2 REPLIES 2

DH1
New Contributor III
Great!

Thanks for the quick reply.

Patrick_Voss
Extreme Employee
You can upgrade these switches and reboot without causing any problems with the EAPS ring. The EAPS ring should re-converge after the switch comes up.
GTM-P2G8KFN