v4110 migrate to c5210

  • 0
  • 1
  • Question
  • Updated 2 weeks ago
Hello,

I am newer to the IndentiFi Wireless line.  I have been searching thru the forums and I have not found enough information to keep from posting this question.

I have a customer that is migrating from v4110 controllers to C5210s.  They need to transfer/migrate about 120 AP 3610 licenses.  Is that something they could call into GTAC to get done ?

Are there any caveats with the 5210 controllers and the 3610 APs (like the 5210 needs to be on version 9 ? )

Eventually, the customer is going to replace the 3610s with 3935s.

Thanks in advance

Jake
Photo of Jake Koch

Jake Koch, Employee

  • 396 Points 250 badge 2x thumb

Posted 2 weeks ago

  • 0
  • 1
Photo of Craig Guilmette

Craig Guilmette, Employee

  • 2,752 Points 2k badge 2x thumb
Hello Jake

You will need to work with Sales as AP capacity licenses are different between different model controllers and the ones for your C4110 can not be applied to the C5210. See link below:
3600 series AP's will only work on 9.x code so your new C5210 will likely need to be backreved to V9. If you received a V10 regulatory Domain license with your new controller you will need to have them get you a V9 instead. GTAC can not do any of this you will need to contact sales. 
https://gtacknowledge.extremenetworks.com/articles/Solution/IdentiFi-AP-Capacity-license-Cannot-be-I...

(Edited)
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
Just to make sure....is it a C5210 or a C5215 ?!

Because the C5215 only supports v10 and that would mean you can't connect AP36xx APs.

Normally you'd order the transfer licenses during the order of the new controller.