cancel
Showing results for 
Search instead for 
Did you mean: 

v4110 migrate to c5210

v4110 migrate to c5210

Jake_Koch
Extreme Employee
Hello,

I am newer to the IndentiFi Wireless line. I have been searching thru the forums and I have not found enough information to keep from posting this question.

I have a customer that is migrating from v4110 controllers to C5210s. They need to transfer/migrate about 120 AP 3610 licenses. Is that something they could call into GTAC to get done ?

Are there any caveats with the 5210 controllers and the 3610 APs (like the 5210 needs to be on version 9 ? )

Eventually, the customer is going to replace the 3610s with 3935s.

Thanks in advance

Jake
5 REPLIES 5

Jake_Koch
Extreme Employee
thank you

Craig_Guilmette
Extreme Employee
That is fine the C5210 can run 9.x code that is required for AP3600 AP's. Keep in mind the 9.x code is end of support Dec 2018. This means no further bug fixes or releases will be available from Engineering after that time. Get those 36xx AP's swapped out ASAP

Jake_Koch
Extreme Employee
sorry for the late response, the controller will be C5210.

Ronald_Dvorak
Honored Contributor
Just to make sure....is it a C5210 or a C5215 ?!

Because the C5215 only supports v10 and that would mean you can't connect AP36xx APs.

Normally you'd order the transfer licenses during the order of the new controller.
GTM-P2G8KFN