cancel
Showing results for 
Search instead for 
Did you mean: 

Viewing LLDP Remote system name in Interface flexview

Viewing LLDP Remote system name in Interface flexview

Ed_Mannion
New Contributor II
I'm trying to create a flexview to view the sysname of devices connected to a port on an Extreme X450. I've found the LLDP Remote Systems view but this doesn't show the local port is there a way to correlate this information? Basically I'm trying to get a list of ports with connected WAP (3825) names rather than MAC addresses. Regards, Ed.
1 REPLY 1

Bob_Maheu
New Contributor
Hello Ed,

You can try adding lldpRemSysName=1.0.8802.1.1.2.1.4.1.1.9 to the LLDP Port Information FlexView. This flexview already provides the local and remote ports information but is missing the remote sysname.
GTM-P2G8KFN