vlan configuration

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
We are having 100 Nos of  Extreme switches having vlan configuration, same vlan at the same time  push to all switches and operating system used two OS, Extremeware and ExOS..I had configured Vlan in the Core level switch, and that changes should replicate at edge switches. This same Conceptual, i had done it on Cisco switches. I had configured VTP concepts earlier.I want to know that how to configure or enable VTP concept in Extreme switches.I had worked with Extreme Switches model bd8800, distribution switch model 8806,and edge level switches summit 400-48t,24t and x440,x450 switches.
Photo of Satheesh Ram

Satheesh Ram

  • 120 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of David Coglianese

David Coglianese, Embassador

  • 7,388 Points 5k badge 2x thumb
I am not aware of anything similar to VTP on Extreme. 

I think your best best would be a NetSight Script to create the vlan and add it to the appropriate ports.

Best of luck,
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,164 Points 50k badge 2x thumb
I've found this...

You'd need to read thru the user manual for more information about the function.
Photo of andreas


  • 1,218 Points 1k badge 2x thumb
into Multiple VLAN Registration Protocol (MVRP)