cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Vlan Graphing

Vlan Graphing

Ian_Worms
New Contributor
Hi All,

We have just replaced a few Cisco Switches with Extreme Switches, with the Cisco switches we could graph each vlan on the switch. I just would like to understand if this is possible with Extreme, we have configure ports x:xx monitor vlan yyyy, so the data is there. Just need the correct MIB id.

Thanks
Ian

7 REPLIES 7

Edwin_Candelari
New Contributor
Hi !
I am using s3 chassis with is posible to graph utilization in a interface vlan ?

B O N D E D S 3 - A C H A S S I S
Command Line Interface

Extreme Networks, Inc.
145 Rio Robles
San Jose, CA 95134
Phone: +1 408 579-2800
E-mail: support@extremenetworks.com
WWW: http://www.extremenetworks.com

(c) Copyright Extreme Networks, Inc. 2015

Chassis Serial Number: xxxxxxxxx
Chassis Firmware Revision: 08.32.02.0008

<content-quote data-username="Edwin Candelario">Hi !
I am using s3 chassis with is posible to graph utilization in a interface vlan ?

B O N D E D S 3 - A C H A S S I S
Command Line Interface

Extreme Networks, Inc.
145 Rio Robles
San Jose, CA 95134
Phone: +1 408 579-2800
E-mail: support@extremenetworks.com
WWW: http://www.extremenetworks.com

(c) Copyright Extreme Networks, Inc. 2015

Chassis Serial Number: xxxxxxxxx
Chassis Firmware Revision: 08.32.02.0008

</content-quote>Hi Edwin, I've split this out into its own thread for better visibility. -Brandon Please reference the new conversation here: VLAN Utilization Graphing via SNMP

Ian_Worms
New Contributor
Hi Stephan,

Thanks for the reply, we will upgrade the XOS and provide feedback.

Ian

StephenW
Extreme Employee
You can get the VLAN indexes with a "get bulk" on this OID. .1.3.6.1.4.1.1916.1.2.8.2.1.2 but make sure you're on EXOS 15.6.2.12-patch1-2, 15.7.2 or 16.1 and higher per this KCS article.

https://gtacknowledge.extremenetworks.com/articles/Solution/Problem-with-downloading-vlan-counters-f...
GTM-P2G8KFN