cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

VRRP priority

VRRP priority

Alok_Shukla
New Contributor III
I have configured MLAG(X670) on two switch and want to configure VRRP active-active can we use same priority level on both switches?


6 REPLIES 6

AnonymousM
Valued Contributor II
Stephane is right. With the introduction of fabric routing we have an easier approach. The ACL was the way to do it before we had fabric routing. Anyway, both ways work.

Bin
Extreme Employee
Hi,

There is one good article which could help you to configure fabric routing.

https://gtacknowledge.extremenetworks.com/articles/How_To/An-example-of-VRRP-fabric-routing-configur...

Best regards,
Bin

thank's Hagemann

Stephane_Grosj1
Extreme Employee
Fabric Routing is a simpler approach, imho. During the VRRP config, this is an option you can turn on.

configure vrrp {vlan vlan_name vr vr_id | all} fabric-routing [on | off]

User Guide:
https://documentation.extremenetworks.com/exos_22.4/EXOS_21_1/VRRP/c_vrrp-fabric-routing-overview.sh...

Command Guide:
https://documentation.extremenetworks.com/exos_commands_22.4/exos_21_1/exos_commands_all/r_configure...

GTM-P2G8KFN