cancel
Showing results for 
Search instead for 
Did you mean: 

What can i use LRM SFP+ Modules in?

What can i use LRM SFP+ Modules in?

Tristram_Barton
New Contributor
Hi there

I've found on 10GB LRM SFP+ modules while having a clean up after my manager left and I don't know what I can use them for.
All I know about these is that LRM stands for Long Range Multimode and it uses1310nm lasers.
Currently I use SR SFP+ modules.

The model of switches I use are:

X460-G2-48P-10G4
X620-16X
X670-G2-48X-4Q

Question is: Can I use these modules in any of my switches and what can I use these modules for?

Thanks

Tristram
5 REPLIES 5

Tomasz
Valued Contributor II
Hi,

see here:
https://www.extremenetworks.com/product/data-center-transceivers-and-cables/
https://www.extremenetworks.com/product/campus-edge-transceivers/

HTH,
Tomasz

Is there an updated copy of this Data sheet that shows some Extreme products? Not the old Enterasys stuff. Also this sheet is from 2014 

Larry_Kunz
Extreme Employee
Hi, Tristram. According to the Hardware/Software Compatibility Matrix for Summit/ExtremeSwitching optics support (link posted by Alexandr above): out of the 3 switches you mentioned, only the X460-G2 supports the 10G LRM SFP+ module -- and only with VIM-2x.

Hope this helps.

Larry Kunz
Information Development
Extreme Networks
GTM-P2G8KFN