cancel
Showing results for 
Search instead for 
Did you mean: 

What do I need to have to stack X460-48P switches

What do I need to have to stack X460-48P switches

BILL_REITLER
New Contributor
What do I need to have to stack X460-48P switches
5 REPLIES 5

BILL_REITLER
New Contributor
Thanks guys that was the info I needed. Guess I am ordering some hardware.

Larry_Kunz
Extreme Employee
The stacking tool, which Jefferson referenced, is very helpful. In addition, here's a link to a page from the Hardware Installation Guide with specific stacking considerations for X460 switches.

Larry Kunz
Information Development
Extreme Networks

Andrew_Imam
Extreme Employee
Hi Bill,

In addition to the Stacking Tool that Jefferson mentioned, please use the steps outlined in the following GTAC Knowledge base article to configure and enable stacking on your X460-48p switches:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-stack-with-Summit-X460-48p-a...

Please let us know if you have any questions.
Thank you.

Best regards,
Andrew

Andrew, Thanks for your support !!!
GTM-P2G8KFN