what is the command to enable the web browser connection to a switch?

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
  • (Edited)
I have one switch that I'm able to connect to web browser and others that I can't.

I'm looking for the command that should run in the others switch to enable the Browser connection.

Thanks
Photo of Bernard Morel

Bernard Morel

  • 92 Points 75 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Stephen Williams

Stephen Williams, Employee

  • 9,034 Points 5k badge 2x thumb
Photo of Bernard Morel

Bernard Morel

  • 92 Points 75 badge 2x thumb
thanks it's works fine for Summit x250-48t.
but not working for Summit 200-24, do you know the command for this model?
Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
Hi Bernard,
It looks like the enable web http command for ExtremeWare devices was added for the Summit e series in v7.3.  What version are you running on the S200-24?
Photo of Bernard Morel

Bernard Morel

  • 92 Points 75 badge 2x thumb

System Serial Number:  800105-00-07 0447G-02101   CP:04
Image : Extremeware  Version 7.8e.4.1 [non-ssh] by Build_Master on 03/18/11 04:1
1:31

BootROM : 5.1

Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
That switch and version should support this feature.  Since the S200 is End-of-Life, I don't have one readily available to test with in our lab.
Let me see if I can get one online again to confirm.
Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
Found the issue... per the release notes:
Enabling HTTP on a Non-SSH ExtremeWare 7.4 or Later Image
In ExtremeWare 7.3, the CLI command syntax used to enable HTTP is enable web http even when upgrading a non-ssh image. In ExtremeWare 7.4, the enable web command is used with the option http/https. This command option is only available with the ssh image. Therefore, when upgrading an ExtremeWare 7.3 non-ssh configuration to an ExtremeWare 7.4 non-ssh configuration, the enable web http command will fail.

Let's get your switch upgraded and SSH capable.  Here's the SSH Image Request Form for ExtremeWare 7.8.4-patch1-4 (the latest available).
https://extrwebapps.extremenetworks.com/WebApps/Public/ExportControl/?swID=112
The file you want from the download is v784b1-patch1-4.SFxtr

I went ahead and gathered the Release Notes for you too:  http://tech.extremenetworks.com/ftp/ftp_new.aspx?file=ExtremeWare%207.8.4b1-patch1-4_RelNote.pdf
Let me know if you need anything else!
(Edited)
Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
Hi Bernard,
Assuming you're talking about an EXOS switch, the command you're looking for is enable web http
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-the-web-interface/

Depending on EXOS version, you may get ScreenPlay or Chalet.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-EXOS-version-is-required-for-Extreme-switches-in-order-to-use-Chalet
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 48,894 Points 20k badge 2x thumb
And you'd check whether it's enabled/disabled with ...

X430-48t.3 # show management
Photo of Stephen Williams

Stephen Williams, Employee

  • 9,034 Points 5k badge 2x thumb
Drew,  I think this one wins for the fastest answered question with 3 responses.  Ha
Photo of Drew C.

Drew C., Community Manager

  • 39,442 Points 20k badge 2x thumb
I think so!  Welcome to The Hub, Bernard!