what is the latest version IOS for Summit48si switches ?

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
  • (Edited)
sh ports no-refresh commands not working in this..my current version is :
7.8.4.1
Photo of Neeraj singh

Neeraj singh

  • 240 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Taykin Izzet

Taykin Izzet , Employee

  • 2,924 Points 2k badge 2x thumb
Neeraj, the latest version for the Extremeware series is v784b1-patch1-4. The v784b1-patch1-4.Bxtr or v784b1-patch1-4.SBxtr files are required for the Summit 48Si.
(Edited)
Photo of Neeraj singh

Neeraj singh

  • 240 Points 100 badge 2x thumb
if we upgrade with patches then it will work..?
Photo of Taykin Izzet

Taykin Izzet , Employee

  • 2,924 Points 2k badge 2x thumb
Neeraj, the command syntax is as follows. The no-refresh syntax does not appear to be available in Extremeware.

show ports {mgmt | <portlist>| vlan <vlan name>} info {detail}

You could try to disable clipaging which will end pausing at the end of the screen.
(Edited)
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,086 Points 10k badge 2x thumb
Hi Neeraj,

7.8.4.1 is the latest version of ExtremeWare. There is a patch release for that, which is patch1-4.

This may be a hardware failure, however. Unfortunately, the Summit  48si is past its end of support date, so it would not be possible to get a hardware replacement for this switch.

-Brandon
Photo of Drew C.

Drew C., Community Manager

  • 37,350 Points 20k badge 2x thumb
The question about firmware has been answered in detail in this thread:
https://community.extremenetworks.com/extreme/topics/latest-firmware-for-summit-48si-15601