cancel
Showing results for 
Search instead for 
Did you mean: 

When you use the 'top' command on a stack, which CPU is it showing you?

When you use the 'top' command on a stack, which CPU is it showing you?

Stanley_Riley_J
New Contributor II
We have a 5 switch stack of x460-48p. Our monitoring software, Solarwinds, is alerting us to high CPU usage very frequently and intermittently on this switch stack. However, when I use the 'top' command, I don't see CPU usage as high as what is being reported.

What CPU information is being shown when I run the 'top' command on the master of the stack?

What are some possibilities for the high CPU being reported?

Thanks,
Stan
11 REPLIES 11

Stanley_Riley_J
New Contributor II
I also made sure that all edge ports were running edge-safeguard, which they are. So I can check that off of my list.

I'm running out of ideas as to why high CPU utilization is being reported.

/sigh

It is possible that SolarWinds is giving you a false positive as you suspected. Since you say that you do not see any high utilization when you use top.

Stanley_Riley_J
New Contributor II
No loops were detected using ELRP for any of our VLANs.

Any other suggestions?

Jeremy_Gibbs
Contributor
You could have a loop. You could run elrp-client oneshot to find one. Excessive traffic hitting the slow-lane (cpu) of switch, instead of being moved to ASIC....

What process is high in top?
GTM-P2G8KFN