Where is "RSS Threshold" or similar on the 7532 ap

  • 1
  • 1
  • Question
  • Updated 3 months ago
  • Answered
Hello guys,

I would like to know where I find the "RSS Threshold" or similar on the RF domain profile of 7532 ap?

It has some document of better configurations for an environment with more than 50 7532 ap with rfs 6000 controller.
Photo of Elias Morais Pereira

Posted 3 months ago

  • 1
  • 1
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 4,710 Points 4k badge 2x thumb
Hello Elias,

do you mean something like this?
VX# show wireless radio statistics rf on <RF-Domain>


Regards,
Ondrej
(Edited)
Hello Ondrej,

Thanks for the answer!!!

Now I would like to know how to configure so that when a client is on an AP with the signal smaller than -70 it is disconnected or pass to another AP with a better signal?
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 4,710 Points 4k badge 2x thumb
Hi Elias,

use roaming assistance policy then

VX(config)# roaming-assist-policy RSSI
VX(config-roaming-assist-policy-RSSI)# handoff-threshold <-100--40> RSSI 
VX(config)# wlan RSSI
VX(config-wlan-RSSI)# use roaming-assist-policy RSSI   
   
Make sure though, you have some "room" for roaming overlap.
Confirm with client RF statistics

VX# show wireless client statistics rf on <RF-Domain>

Regards,
Ondrej
(Edited)
Hi Ondrej,

I searched the options via wegui but did not find it. Can I make these settings via wegui, or only via terminal?
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 4,710 Points 4k badge 2x thumb
Hi Elias,

I bet this is something you can configure only using CLI.

Regards,
Ondrej
Ok Ondrej,

Thanks for your help!!! :D