WiNG AP 7522 is not managing with WiNG VX9000 controller?

  • 0
  • 1
  • Problem
  • Updated 4 weeks ago
I am unable to manage the WiNG AP7522 to WiNG VX9000 controller, I have checked the firmware version of AP and Controller even though both are having the same firmware AP is not adopting with WiNG vx900 controller

Firmware:AP7522 & VX9000 version 5.9.0.0-033R
Photo of Prabhu.M

Prabhu.M

  • 232 Points 100 badge 2x thumb

Posted 1 month ago

  • 0
  • 1
Photo of Andrew Blomley

Andrew Blomley, Employee

  • 372 Points 250 badge 2x thumb
please run the following command of the cli of the access point 

show mint mlcp history 

this should tell if the ap is look for the controller 

is the Ap on the same broadcast domain as the VX ? 

could you also send the running config of the controller ?? 

Andy 
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 3,768 Points 3k badge 2x thumb
Are you sure that the AP7522 is not  'Express' version AP? Can you provide a full part number of the AP7522, you can get that via cli command ' sh version' 
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 3,768 Points 3k badge 2x thumb
Note that Enterprise VX9K will not adopt Express AP
Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 3,768 Points 3k badge 2x thumb
Try setting the controller host on the AP, here are CLI commands : 

AP#self
AP(config-device )#controller host xx.xx.xx.xx
AP(config-device )#commit write
Photo of Carlos Assunção

Carlos Assunção

  • 164 Points 100 badge 2x thumb
See if the AP7522 firmware is also uploaded on the VX. Some customer mine has that same issue... the firmare is not by default on the VX.
Photo of Andrew Blomley

Andrew Blomley, Employee

  • 372 Points 250 badge 2x thumb
The VX9000 is supplied into downloadable image images

          image 1) VX9000-5.9.1.4-004R.img 

This is the  full image contains all software images for all support access point

          image 2)VX9000-LEAN-5.9.1.4-004R.img 

The lean image has had the AP software images removed to reduce the size of the software build


To confirm the software images installed 

please use the following command 

         show device-image versions 

This will list all software versions installed

AP's will also adopt even if the there is a software mismatch.

show adoption status 

will tell you if the aps have been adopted, if there is a software mismatch this will show here.

Finally, the VX9000 does not automatically update the firmware 

to manually update firmware please use 

device-upgrade all