Wing AP7532 POE consumption

  • 0
  • 1
  • Question
  • Updated 3 months ago
  • Answered
Hi,

I wonder what is the watts consumption of AP7532? i cant find this info on instalation guide and ap data sheet.

Regards
Bart
Photo of Bart Bielewicz

Bart Bielewicz

  • 90 Points 75 badge 2x thumb

Posted 3 months ago

  • 0
  • 1
Photo of Tomasz

Tomasz

  • 2,394 Points 2k badge 2x thumb
Hello Bart,

The operating current stated in the datasheet is 312mA at 48V DC so it sounds like a little below 15W. But it can be lower with idle state, low load etc.
Hope that helps.

Regards,
Tomasz
Photo of Bart Bielewicz

Bart Bielewicz

  • 90 Points 75 badge 2x thumb

OK thanks Tomasz,


Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 6,100 Points 5k badge 2x thumb
Hello Bart,

you can see selected PoE standad using show wireless ap detail <device name | on RFdomain> 

VX# show wireless ap detail on AP

<omitted>
 Power management information for ap7532:
      Power management Mode        : Auto
      Power management status      : 3af
      Ethernet power status        : all up
      Radio power status           : all up
Total number of APs displayed: 1

But better overview you may get on connected switches | PSE (show power status)
Here is example from my lab RFS and two AP7532s
RFS6000# show power status
System Voltage: 53.3 volts
  Guard Band: 32 watts
  Power Budget: 190 watts Power Consumption: 16 watts
  poe device 1 temperature 35C
  poe device 2 temperature 33C
--------------------------------------------------------------------------------
     PORT        VOLTS           mA          WATTS        CLASS       STATUS
--------------------------------------------------------------------------------
  ge1          53.3           151           8.1          4          On
  ge2          53.3           153           8.2          4          On
  ge3           0.0             0           0.0          0          Off
  ge4           0.0             0           0.0          0          Off
  ge5           0.0             0           0.0          0          Off
  ge6           0.0             0           0.0          0          Off
  ge7           0.0             0           0.0          0          Off
  ge8           0.0             0           0.0          0          Off
--------------------------------------------------------------------------------

Regards,
Ondrej
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 6,100 Points 5k badge 2x thumb
Note:

Radio utilization, Tx power, amount of clients and RF noise around together with number of services running on AP | PD may change the consumption.

You shall never drop PoE switch | PSE provisioning below .3af standard otherwise the AP | PD may not even boot up correctly.

Regards,
Ondrej
Photo of Christoph S.

Christoph S., Employee

  • 3,684 Points 3k badge 2x thumb
This off of the AP label itself:

Input rating:

12VDC - 1.25A so 15W
48VDC - 0.375A (POE) so 18W



Regards,

Chris
Photo of Bart Bielewicz

Bart Bielewicz

  • 90 Points 75 badge 2x thumb
Very informative, thanks all for input.