Wing controller adaption

  • 0
  • 1
  • Question
  • Updated 5 months ago
  • Answered
Dear All,

Bonjour,

I'm new to extreme devices and Wing. Can anyone help me understand in adaption what is pool and level. Why should I need to mention pool and level counts.?


EX:-  controller host  xx.xx.xx.xx pool 1 level 2
Photo of Vimalraj Veerabathiran

Vimalraj Veerabathiran

  • 418 Points 250 badge 2x thumb
  • thankful

Posted 6 months ago

  • 0
  • 1
Photo of Darrel Rhodes

Darrel Rhodes, Employee

  • 1,022 Points 1k badge 2x thumb
Hi Vimalraj,

My understanding is that this is functionality to provide load balancing of adopted AP across multiple controllers. 

Please see page 5 - 45 in the WiNG 5.9 WLC Service Reference Guide:  http://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf

Hope that helps!

Thanks,
Darrel.
Thanks for the information. I get to know that what is adoption, but still difficult to understand pool and level concepts.

Photo of Christopher Frazee

Christopher Frazee, Employee

  • 1,446 Points 1k badge 2x thumb
Hello Vimalrag,
      We have some very useful documentation in GTAC Support in regards to adoption and mint/pool levels explained. Please either call 800.872.8440 or online submission http://support.extremenetworks.com to get a support case generated in order that we can provide the documentation. 
Photo of Timo

Timo

  • 3,210 Points 3k badge 2x thumb
Hi,
you can add two pools of controller for fail over. Most WiNG installation use just one pool.

The level is for MINT links. You can see it as routing, level 1 for local deployments and level 2 for NOC deployments with different RF domains.

Pool1=<Cluster-1-NX-1>,<Cluster-1-NX-2>;Pool2=<Cluster-2-NX-1>,<Cluster-2-NX-2>;level=1|2
It's easy to understood.

Thanks.
Photo of Christina M

Christina M, Lead Technical Editor, Information Development

  • 1,416 Points 1k badge 2x thumb
Hi there!

This command allows you to select routing levels for IPv4, IPv6, or hostname. At the command line, pool options are 1 or 2 (default is 1). Then choose a routing level: 1 being local routing and 2 being inter-site routing.

Link to doc: http://documentation.extremenetworks.com/WiNG/5.9.1/9035205_WiNG_5_9_1_WC_CLI.pdf (see page 7-68)

Hope that helps!
Hola !!

It happens.