cancel
Showing results for 
Search instead for 
Did you mean: 

Wing Express - restrict SSID to only part of access points

Wing Express - restrict SSID to only part of access points

Ronald_Groenewe
New Contributor
We would like to use one Wing Express controller with roughly 50 AP7522 access points but I would like to restrict a certain SSID to only be in use on 25% of those access points. This would allow us to restrict the area of a specific SSID. Can this be realised with Wing Express or should I add a 2nd separate controller?
3 REPLIES 3

Ronald_Groenewe
New Contributor
Excellent, thanks guys for the input.

We are still in the design phase so this means I can continue my plan with a controller and 7522's.

I'm gonna start digging into the manual 😉

Bin
Extreme Employee
In WiNG Express, the configuration that are performed at the system level can be modified at Site level and Device level (which Jesus referenced). Site provide the ability to allow administrators to override Wireless LAN SSID names and VLAN assignments for Access Points assigned to the Site.

In your case, you could put 25% of those APs in one site and the other APs use other site.

Best regards,

JESUS_REYES_DIA
New Contributor
ok first at all , you need to apply the same profile till then apply override over the AP that you need only certain SSID.
GTM-P2G8KFN