wireless controller first login c5210

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi all

I got new wireless controller C5210. I need to do the first login. I have connected my laptop to port eth0 of the controller. my laptop IP is 192.168.10.10. I can not login the controller at the default IP which should be 192.168.10.1 and port 5825 neither can't ping this IP.

anyway have advice for such case.

Thanks in advance,
Husam
Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Alexandr P

Alexandr P, Embassador

  • 12,192 Points 10k badge 2x thumb
Hi, Husam!

You have to connect to Mgmt port (192.168.10.1), but not in eth0.
After first connect you can configure Topologies (ports) and other.

Thank you!
Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb
Hi AlexandrP,

Thanks for your response. I am connecting my laptop directly to port eth0 which according to quick reference is the mgmt port. I am not connecting to asa0 nor asa1

is there any other management port?

Thanks in advance,
Husam
 
Photo of Alexandr P

Alexandr P, Embassador

  • 12,192 Points 10k badge 2x thumb
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,502 Points 20k badge 2x thumb
(Edited)
Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb
my laptop is connected to port marked C in quick reference, is it right ? 
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,502 Points 20k badge 2x thumb
If it still does not work you can try to attach a console cable directly to the controller. 

 https://gtacknowledge.extremenetworks.com/articles/Q_A/Using-the-Console-Port-on-the-IdentiFi-Wireless-Appliance-C25-C4110-C5110-and-C5210

Please note, the fans will spin even when the appliance is offline so make sure the appliance is really powered up. 
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,502 Points 20k badge 2x thumb
ok, try the console cable to see if you get any output... 
Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb
Hi,

I got this output!!! it is new to me! 


Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb
Also below output

Version 2.00.1201. Copyright (C) 2010 - 2012 American Megatrends, Inc.          Bios Version: SE5C600.86B.01.08.0003.022620131521                               
BMC Firmware Version: 1.17.4207                                                 
SDR Version: SDR Package 1.09                                                   
ME Firmware Version: 2.1.7.112                                                  
Platform ID: S2600GZ                                                            
System memory detected: 16384 MB                                                
Current memory speed: 1333 MT/s                                                 
Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz                                        
Number of physical processors identified: 2                                     
********************************************************************************
AHCI Capable Controller enabling 2 ports of 6Gb/s SATA                          
SAS/SATA Capable Controller configured with 4 ports in SATA mode                
********************************************************************************
USB Keyboard detected                                                           
                                                                                
                                                                                
Press <F2> to enter setup, <F6> Boot Menu, <F12> Network Boot                   
Photo of Husam

Husam

  • 1,272 Points 1k badge 2x thumb
also this output:


FI Shell version 2.00 [4.632]Current running mode 1.1.2
Device mapping table
  blk0 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part1,Sig76E8F4C6)
  blk1 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part2,Sig76E8F4C6)
  blk2 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part3,Sig76E8F4C6)
  blk3 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part4,Sig00000000)
  blk4 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part5,Sig00000000)
  blk5 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part6,Sig00000000)
  blk6 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part7,Sig00000000)
  blk7 :HardDisk - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)/HD(Part8,Sig00000000)
  blk8 :BlockDevice - Alias (null)
        Acpi(PNP0A03,0)/Pci(11|0)/Pci(0|0)/VenHw(Unknown Device,80000000)

Press ESC in 1 seconds to skip startup.nsh, any other key to continue. 
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,502 Points 20k badge 2x thumb
what happens when you press enter, will it get you to a prompt?