Wireless planner tool issue

  • 0
  • 1
  • Problem
  • Updated 2 months ago
  • Solved
Hello, all!

Upload image.
1. Draw boundary.
Trying Set scale and receive error - Floor size is out of bounds.
2. Set scale.
Trying to draw Boundary and receive error - Boundary size is out of bounds.

Any ideas?

Thank you!
Photo of Alexandr P

Alexandr P, Embassador

  • 12,192 Points 10k badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,578 Points 5k badge 2x thumb
Hi Alexandr

How large is the area in square metres you are using as your plan?

-Gareth
Photo of Alexandr P

Alexandr P, Embassador

  • 12,192 Points 10k badge 2x thumb
Hello, Gareth!

96x177 meters.

Thank you!
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,578 Points 5k badge 2x thumb
Thanks - I'm checking into that and will let get back to you as soon as possible.
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,578 Points 5k badge 2x thumb
Hi Alexandr

The current limit is 10000 square metres, can you subdivide the area somehow?

-Gareth
Photo of Alexandr P

Alexandr P, Embassador

  • 12,192 Points 10k badge 2x thumb
Thank you for information!

I'll try.
Photo of DINESH KUMAR

DINESH KUMAR

  • 60 Points
hi
how to load image on planner
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 46,684 Points 20k badge 2x thumb
Take a look in the below image....

On the right side you'd see my location tree with Country Austria, location Vienna
 and per location you'd create floors (EG in my example).

Then on the floor level in the lower left corner you've th elink for image upload.