cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Wireless V2110 Station Event Detail

Wireless V2110 Station Event Detail

Giuseppe_Montan
Contributor
Good Morning, i want to know the meaning of Voice "ROAMED = NO " in attached file.
We have some issue with Ascom I62 / OpenStage WL3 and Acess Point 3805 - 3965i.

Thank You
Giuseppe

890b22dc8bd2413d9ba220c814b26339_RackMultipart20170321-112812-1n9baf7-Roaming_inline.jpg


10 REPLIES 10

Umut_Aydin
Extreme Employee
Static is recommended.

Rgds
-Umut

Giuseppe_Montan
Contributor
OK, I changed the value of DTIM from 5 to 2..but sometimes we have the same Issue.
So I changed the radio frequencies from 2.4GHZ to 5 GHZ. In your Opinion is better to put static channel or automatic channel, the same thing for Power, better static or automatic ?
thanks

Giuseppe

Umut_Aydin
Extreme Employee
Hi Giuseppe,

without having much info..

a quick test if you always see the issue ..means if you can reproduce the issue at will...
then look on which AP the ASCOM is connected and on which radio and change the DTIm settings from 5 to 2 on the AP config( advance button) and look if you see immediately any improvements.

Additioanlly I would recommend to update to 10.21.03.

Regards

Umut Aydin

Giuseppe_Montan
Contributor
The version of controller is V2110-10.21.02.0017
GTM-P2G8KFN