wireless controller C100 Unmounting file systems:

  • 0
  • 1
  • Problem
  • Updated 5 years ago
  • Solved
Problem Description: I have a controller
c100 in version 3.1 ,i have onli CLI session with serial cable .

The led status remains off

When C100 was started I try to do software
update ,but it failed and I can 't use GUI for configuration .

I can use only serial connection 9600 N8 1

Rebooting...

INIT: Sending processes the TERM signal

Stopping anacron: [  OK  ]

Stopping keytable:  [  OK 
]

Shutting down console mouse services:
[  OK  ]

Stopping sshd:[  OK  ]

Stopping xinetd: [  OK  ]

Stopping crond: [  OK  ]

Stopping portmapper: [  OK  ]

Shutting down kernel logger: [ 
OK  ]

Shutting down system logger: [ 
OK  ]

Shutting down interface eth0: 
[  OK  ]

Shutting down loopback interface: 
[  OK  ]

Starting killall:  [  OK  ]

Sending all processes the TERM signal...

Sending all procmd: recovery thread got
woken up ...

esses the KILL signal...

Syncing hardware clock to system time

Turning off swap: 

Turning off quotas: 

Unmounting file systems: 

Please stand by while rebooting the
system...

flushing ide devices: hda

Restarting system.

root (hd0,0)

Filesystem type is ext2fs, partition type
0x83

kernel /boot/vmlinuz ro root=LABEL=/
console=tty0

   [Linux-bzImage, setup=0x1400,
size=0x1101c6]

initrd /boot/initrd.img

   [Linux-initrd @ 0x1ffbf000,
0x2028e bytes]

HiPath Wireless Controller version 3.1.3.00.06

Unauthorized access is prohibited.

HWC login: root

Password:

[root@HWC root]#

[root@HWC root]#

I have remote connection

Contact language: Italian, English only
written

Photo of Ivo Treppaoli

Ivo Treppaoli

  • 70 Points

Posted 5 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
Official Response
Unfortunately this product is not something that was supported/offered by Enterasys or Extreme. If you are looking for a comparable replacement to this product, you should contact gsola@enterasys.com directly to discuss your options. 

Regards, 

Doug Hyde
Sr Support Engineer
Extreme Networks