wm3600 the number of connected AP via SNMP

  • 0
  • 1
  • Question
  • Updated 4 years ago
How to know the number of connected points and their status via snmp.


Photo of Roman

Roman

  • 80 Points 75 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Sumit Tokle

Sumit Tokle, Alum

  • 5,738 Points 5k badge 2x thumb
1) This is the OID for the total number of wireless clients on the AP : .1.3.6.1.4.1.1916.2.131.50.1.4.2.25.1.1.1.4.

2) This OID give you the total number of clients OID value : .1.3.6.1.4.1.1916.2.131.50.1.4.2.25.10.1.1.22

I believe we don't have OID to provide the information about the number of adopted AP. 
Photo of Roman

Roman

  • 80 Points 75 badge 2x thumb
Many thanks!
Photo of Leandro Brito

Leandro Brito, Alum

  • 232 Points 100 badge 2x thumb
You can get the number of wireless users connected to WM through this OID:

.1.3.6.1.4.1.1916.2.131.1.1.8.1.19.0
Photo of Marckson Silva

Marckson Silva

  • 130 Points 100 badge 2x thumb
Hi, the zabbix server has configured based on the tutorial below, but do not return total number of clients OID value: .1.3.6.1.4.1.1916.2.131.50.1.4.2.25.10.1.1.22  or number of wireless users .1.3.6.1.4.1.1916.2.131.1.1.8.1.19.0.   LINK: https://www.zabbix.com/documentation/2.0/manual/config/items/itemtypes/snmptrap
Photo of Marckson Silva

Marckson Silva

  • 130 Points 100 badge 2x thumb
trap configuration file: /etc/snmp$ cat snmptt.conf 

EVENT general .* "General event" NormalFORMAT ZBXTRAP $aA $ar
SDESC
Permite zabbix capturar traps de qualquer OID que tiver chave snmptrap General event.
EDESC