cancel
Showing results for 
Search instead for 
Did you mean: 

X350 ports strange behavior

X350 ports strange behavior

Alexandr_P
Valued Contributor
Hello, all!

Have an X350-48t (with XGM2 card) with strange behavior of ports.
In some time ports LEDs is showing thats port is active - but even cable dont inserted.
Ports which used is stopped to froward traffic.
Disabled management access (only work 10G ports from XGM2 card).

Diagnostic show that all normall (all test is pass).
Have below strange logs:
07/22/2016 20:17:54.12 Port preferred-medium fiber failed for port 4807/22/2016 20:17:54.12 Port preferred-medium fiber failed for port 47
07/22/2016 20:17:54.12 Port preferred-medium fiber failed for port 46
07/22/2016 20:17:54.12 Port preferred-medium fiber failed for port 45
07/22/2016 20:17:53.95 Port auto-negation on failed for port 1:48 medium copper
07/22/2016 20:17:53.93 Port auto-negation on failed for port 1:47 medium copper
07/22/2016 20:17:53.92 Port auto-negation on failed for port 1:46 medium copper
07/22/2016 20:17:53.92 Port auto-negation off failed for port 1:45 medium fiber
07/22/2016 20:17:53.92 Port auto-negation on failed for port 1:45 medium copper

07/22/2016 20:11:36.66 smbus_xfer:0 smbus_wait_rdy error!! rc => -145 addr: 71; read_write 0; command 6; size 107/22/2016 20:11:36.66 smbus_wait_rdy: timeout waiting for SMBUS
07/22/2016 20:11:33.66 smbus_xfer:0 smbus_wait_rdy error!! rc => -145 addr: 47; read_write 1; command 4; size 2
07/22/2016 20:11:33.66 smbus_wait_rdy: timeout waiting for SMBUS
07/22/2016 20:11:30.66 smbus_xfer:0 smbus_wait_rdy error!! rc => -145 addr: 71; read_write 0; command 6; size 1
07/22/2016 20:11:30.66 smbus_wait_rdy: timeout waiting for SMBUS
07/22/2016 20:11:27.66 smbus_xfer:0 smbus_wait_rdy error!! rc => -145 addr: 47; read_write 0; command 2; size 2
07/22/2016 20:11:27.66 smbus_wait_rdy: timeout waiting for SMBUS
07/22/2016 20:11:24.66 smbus_xfer:0 smbus_wait_rdy error!! rc => -145 addr: 71; read_write 0; command 6; size 1
07/22/2016 20:11:24.66 smbus_wait_rdy: timeout waiting for SMBUS

EXOS is 12 version - but Customer have no access to newer version.

Any ideas?
Can it be RMA case? Because X350 is still have valid warranty.

Thank you!
7 REPLIES 7

OscarK
Extreme Employee
Try removing all SFP's, reboot the switch and put them back in one by one. Maybe one of the SFP's is causing a hang on the i2c bus ?

Alexandr_P
Valued Contributor
Thank you for help!

"@@@ system detail" from the "show tech detail" output may contain some info about the issue. Looks like the problem is with phy for combo-ports and most of all it is a RMA.

OscarK
Extreme Employee
i think it is then time to replace/RMA the switch. You can try an upgrade but I doubt it will resurrect the ports.
GTM-P2G8KFN