X430 IP address on default VLAN

  • 0
  • 1
  • Problem
  • Updated 3 months ago
  • Solved
I'm trying to put a new x430 switch on the network with IP 192.168.129.126

I set it up with the following commands

disable dhcp vlan Default
configure vlan Default add ports 7-10 untagged
configure vlan Default ipaddress 192.168.129.126/24
configure iproute add Default 192.168.129.2

The problem is that I can't see that IP on my network.  I'm plugged into port 8.  

The switch this one is plugged into is Enterasys C-Series port 21 which is also configured vlan default untagged.

I can't ping 192.168.129.126. I can't connect http.  I feel like I'm just going in circles.
Photo of David L. Church

David L. Church

  • 80 Points 75 badge 2x thumb

Posted 3 months ago

  • 0
  • 1
Photo of Robert Cummins

Robert Cummins

  • 350 Points 250 badge 2x thumb
How are you trying to use this switch?  Is it a L2 or L3 device?   What does the fdb show?   What does iparp show? 
Photo of David L. Church

David L. Church

  • 80 Points 75 badge 2x thumb
Update:  I was trying to resolve another switch on the network and determined the port I was plugged into was blocked for the Default VLAN.  This was my problem