cancel
Showing results for 
Search instead for 
Did you mean: 

X440 Bootrom not responding to spacebar

X440 Bootrom not responding to spacebar

Frank_Veen
New Contributor II
Hello,

We are trying to reset the admin password of our X440 Exos switch.
The switch is not responding to the spacebar to enter bootrom. Do we have wrong bootrom?

Is there another (hardware button) to reset the complete configuration of the switch?

We have connected serial cable and we tried following programs: secureCRT , screen /terminal combination.





Kind regards,

Frank

Boot text:

Extreme Networks



Alternate BootStrap Image

Starting CRC of Default image

Using Default image ...



Extreme Networks



Default BootLoader Image

DRAM Post



Press and hold the to enter the bootrom.

Copyright 2003 - 2013 Extreme Networks, Inc.









Loading OS Image ...

Running Image ...



Starting ExtremeXOS 16.1.3b6



3 REPLIES 3

Frank_Veen
New Contributor II
Hi OscarK,

Thank you for helping.
We are indeed using a Mac and after also contact with Gtac we found out that it was working with Windows/Putty combination.

Frank

OscarK
Extreme Employee
Hello Frank, did this answer help ?

OscarK
Extreme Employee
Keep holding the spacebar until you get the prompt. Just hitting the spacebar a few times is not enough. Are you using a mac , then this article may apply.
https://gtacknowledge.extremenetworks.com/articles/How_To/howto-get-into-Bootrom-with-a-Apple-Mac

Also on some windows clients you need to 'up' the keyboard repeat.

GTM-P2G8KFN