cancel
Showing results for 
Search instead for 
Did you mean: 

X440 G2 Stacking with 10GBASE-CR SFP+ 1m

X440 G2 Stacking with 10GBASE-CR SFP+ 1m

Mareen
New Contributor
Hi,

short an quik:

Is it possible to Stack 2 X440 G2 48p 10GE4 with 10GBASE-CR SFP+ 1m Cable?

Thank you in advance 
4 REPLIES 4

Paul_Russo
Extreme Employee
Mareen you can use one cable as we do support a daisy-chain design but it is not recommended as it can get you into some trouble with a dual master if the ring fails. So I agree with Phillip that you should use two.

P

Muhammad_Tariq
Extreme Employee
Hi,

Yes it would work! Please make sure you use Ports 49 and 50 when stacking X440-G2-48p-10GE4 switches.

Please also see the below article:
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-ports-are-used-when-stacking-X440-G2-48...

Kind regards,
Muhammad Tariq

Mareen
New Contributor
Hi Phillip,

thanks 

Philipp_Tittman
New Contributor III
Hi,
yes but you will need at least two cables. The EXOS stack needs to be an ring topology

Hope this helps

Regards
GTM-P2G8KFN