cancel
Showing results for 
Search instead for 
Did you mean: 

x440 gbic issues

x440 gbic issues

Luis_Mendes
Contributor
Issues with gbic 10gb, the same gbic works on others model (x450-g2).

Slot-2 Stack.6 # debug hal show optic-info slot 2 port 28
Port 28
SFP or SFP+: SFP
Signal: not present
TX Fault: no
SFP/SFP+ Vendor: 7/ot
SFP/SFP+ Part Number: S+85DLC03D
SFP/SFP+ Serial Number: STTS5
SFP/SFP+ Manufacture Date: 07
SFP/SFP+ Type: SFP/SFP+
Connector: LC
GE Compliance: UNKNOWN (0x0)
Wavelength: 815

I upgrade the firmware for last version, but the same message, its occurs on 2 x440-g2 24t.

24 REPLIES 24

Paul_Holtz
New Contributor
Hi Nikolay,

Thanks for confirming that CR xos0064983 will be addressed in EXOS 22.3. I'm really looking forward to this issue being fixed for the X620.

Paul

Necheporenko__N
Extreme Employee
Hello Luis,

The issue you have faced is documented under CR xos0064983, please check next article - https://gtacknowledge.extremenetworks.com/articles/Solution/Optics-information-are-not-displayed-pro...

I've seen the issue with both SFP and SFP+ optic modules, issue will be fixed with EXOS release 22.3

Best Regards,
Nikolay

Stephane_Grosj1
Extreme Employee
Carsten is correct.

cbuchenau
Contributor
You are missing the 10g port licenses. You buy them for 2 or 4 ports. You only need them for Data usage - when you use them for stacking, they are running on 10g without license.
GTM-P2G8KFN