cancel
Showing results for 
Search instead for 
Did you mean: 

X440g-2 switch alcatel ip phone LLDP advertisement

X440g-2 switch alcatel ip phone LLDP advertisement

nwmonster
New Contributor II

I am using X440-g2 switches and alcatel 4028 ip phones. I want to use voice and user vlan from 1 port. My port configuration is tagged "voice-vlan" and untagged "user-wired-vlan" . Phones take from untagged vlan. Phones should take from tagged vlan.

I tried this solutions but it's not working. https://extremeportal.force.com/ExtrArticleDetail?an=000083139

Thanks

8 REPLIES 8

Jacob__Praveen
Extreme Employee
You might want to include this command check : configure lldp ports all advertise vendor-specific dot1 port-protocol-vlan-id

nwmonster
New Contributor II
configure lldp port 2 advertise port-description
configure lldp port 2 advertise system-name
configure lldp port 2 advertise system-capabilities
configure lldp port 2 advertise management-address
configure lldp port 2 advertise vendor-specific med capabilities
configure lldp port 2 advertise vendor-specific dot1 vlan-name vlan Voice_Phone

BrandonC
Extreme Employee
Can you post the LLDP config for one of the ports in question?

nwmonster
New Contributor II

you can see below , thanks

LLDP Port 2 detected 1 neighbor Neighbor: 00:80:9F:DC:5A:BC/00:80:9F:DC:5A:BC, age 86 seconds
- Chassis ID type: MAC address (4)
Chassis ID : 00:80:9F:DC:5A:BC
- Port ID type: MAC address (3)
Port ID : 00:80:9F:DC:5A:BC
- Time To Live: 480 seconds
- System Capabilities : "Telephone"
Enabled Capabilities: "Telephone"
- IEEE802.3 MAC/PHY Configuration/Status
Auto-negotiation : Supported, Enabled (0x03)
Operational MAU Type : 1000BaseTFD (30)
- MED Capabilities: "MED Capabilities, Network Policy, Extended Power via MDI - PD, Inventory"
MED Device Type : Endpoint Class III (3)
- MED Network Policy
Application Type : Voice (1)
Policy Flags : Unknown Policy, Untagged (0x0)
VLAN ID : 30
L2 Priority : 0
DSCP Value : 0
- MED Extended Power-via-MDI
Power Type : PD Device (1)
Power Source : PSE (1)
Power Priority: Low (3)
Power Value : 5.6 Watts
- MED Hardware Revision: "3GV23021JFDA031452"
- MED Firmware Revision: "NOE 4.34.21"
- MED Software Revision: "NOE 4.34.21"
- MED Serial Number: "FCN01435710778"
- MED Manufacturer Name: "Alcatel-Lucent Enterprise"
- MED Model Name: "IP Touch 4038 EE"
- MED Asset ID: "00:80:9f:dc:5a:bc"

GTM-P2G8KFN