cancel
Showing results for 
Search instead for 
Did you mean: 

x450a SNMP Temp sensor not updating

x450a SNMP Temp sensor not updating

Kaon_Thana
New Contributor II
My SNMPv2 monitoring server is set to monitor OID 1.3.6.1.4.1.1916.1.1.1.8.0 (snmp temp sensor) on an extreme x450a (version 12.4.1.7).

The problem:

- When the server queries the switch, the switch always reports the same temperature.

- When I log into the switch (CLI) and run "show temp" or "show snmp get " I see the correct temp.

- The next time my monitoring service queries the switch, it reports the new temp.

Wireshark captures confirm the packet coming back from the switch is the old stale value.

Not sure if the switch is caching this or what. Is there a way to fix this?

1 REPLY 1

Karthik_Mohando
Extreme Employee
Hi Kaon,

This bug is fixed from 12.4.4.8-patch1-2
12.x EXOS versions are end of support, i would recommend to take a look at the below link and upgrade to supported and stable version of EXOS.

https://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/softw...
GTM-P2G8KFN