x670 ideal operating temperature (stack with x460)

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi community,

I have X670G2-48x-4q and X460G2-48t-G4 (version 16.1.1.4) switches stacked with each other. When i have looked up its 'show temperature output is like that :


-> show temperature    
Field Replaceable Units Temp (C) Status Min Normal Max --------------------------------------------------------------------------- Slot-1 : X670G2-48x-4q 74.50 Normal 0 10-100 110 Slot-2 : X460G2-48t-G4 82.28 Normal 0 10-100 110 Slot-3 :

Although status part is normal, I am not sure  the temperature value is normal or not. It could be higher than its operational temperature. In X670 data sheet, operating temperature is between 0 to 45° C  and in x460, 0° C to 50° C.  The cpu usage and fan status is also normal.

 I didn't observe any abnormal log on the switch and  i don't have any information about operating temperature in stacking conditions.

I wonder these temperature values is normal or not in a standard data center.

Thanks!

Photo of Yasar

Yasar

  • 136 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,536 Points 3k badge 2x thumb
Hi Yasar,

Please find the below article , I hope this will answer your question.

https://gtacknowledge.extremenetworks.com/articles/Q_A/Normal-operating-temperature-range-for-a-Summ...

Thanks,
Suresh.B
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,484 Points 10k badge 2x thumb
Hi Yasar,

Just to clarify, the temperature ranges you found in the data sheets are for the first generation X670 and X460. The X670-G2 and X460-G2 switches have a higher maximum operating temperature, as indicated in the CLI output.

-Brandon