cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

XGM2-2sf - only for stacking?

XGM2-2sf - only for stacking?

Anonymous
Not applicable
I have a Extreme x450e-01 with a XGM2-2sf module in the back. I have two servers which have SFP+ NICs. I want to connect those two servers to this switch through that module.

Is this feasible? My goal is to have the two servers connected to the switch via SFP+ as opposed to a patch cable.

Thanks.
1 REPLY 1

Tripathy__Priya
Extreme Employee
Hello Dan,

Welcome to HUB for your participation.

Coming to your query regarding the SFP+ module if can be attached directly through the NICs card for servers enabled with SFP+ feature or not?

I hope yes can be achieved if we use SFP+ direct-attach passive copper cable (XGM2-2sf option card required). This contains 1,3,5 and 10 meter distance length.

Moreover the XGM2-2sf ports are 10-gb SFP+ ports and do not support 1-Gb optics.

For further reference please refer to the below link:

http://www.extremenetworks.com/wp-content/uploads/2014/02/120675-00_Rev_04_ExtremeXOS_Hardware_and_S...

Please let us know if this helps you for your requirements.

GTM-P2G8KFN