XOS 15.7.1.4 show iproute

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Hi,

under 'Ori' there is #d (directly connected, I guess), but there is not 'd' in the table below

platform: BD8806 MSM-48c



show iproute 
#s   Default Route      172.31.150.254  1    UG---S-um--f- Default    0d:1h:40m:2s
#d   172.31.150.0/24    172.31.150.200  1    U------um--f- Default    0d:1h:40m:5s
       (mo) MOSPF (o) OSPF, (o1) OSPFExt1, (o2) OSPFExt2,
       (oa) OSPFIntra, (oe) OSPFAsExt, (or) OSPFInter, (pd) PIM-DM, (ps) PIM-SM,
       (r) RIP, (ra) RtAdvrt, (s) Static, (sv) SLB_VIP, (un) UnKnown,
       (*) Preferred unicast route (@) Preferred multicast route,
       (#) Preferred unicast and multicast route.
Flags: (b) BFD protection requested, (B) BlackHole, (c) Compressed, (D) Dynamic,
       (f) Provided to FIB, (G) Gateway, (H) Host Route, (l) Calculated LDP LSP,
       (L) Matching LDP LSP, (m) Multicast, (p) BFD protection active, (P) LPM-routing,
       (R) Modified, (s) Static LSP, (S) Static, (t) Calculated RSVP-TE LSP,
       (T) Matching RSVP-TE LSP, (u) Unicast, (U) Up, (3) L3VPN Route.
MPLS Label: (S) Bottom of Label Stack 
Mask distribution:
     1 default routes                1 routes at length 24
Route Origin distribution:
     1 routes from Direct               1 routes from Static    
Total number of routes = 2
Total number of compressed routes = 0
Thank you
--
antonio
Photo of Antonio Prado

Antonio Prado

  • 610 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,304 Points 10k badge 2x thumb
Official Response
Hi Antonio,

This looks like it is a known issue that should be fixed in EXOS 15.7.2. See this KB article for more information.

-Brandon