XSR VPN EZIPSEC

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Hi,

is there an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?
Photo of Dietmar Bunk

Dietmar Bunk

  • 160 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
Photo of Dietmar Bunk

Dietmar Bunk

  • 160 Points 100 badge 2x thumb
Hi,

sorry - this does ́nt help because your article is for "Static IP addresses on all WAN ports".

we need an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
No problem, I will have one of our XSR Techs take a look at your request.... 

-Doug
Photo of Jerome, Raymond

Jerome, Raymond, Employee

  • 140 Points 100 badge 2x thumb
Photo of Dietmar Bunk

Dietmar Bunk

  • 160 Points 100 badge 2x thumb
Hi,

have tried these configurations - but the Central site router logs:

IKE: IKE 'Mode Config' (dynamic address assignment) is disabled.
TMS: Unable to find local interface for IP 0.0.0.0!

whats the problem?
Photo of Jerome, Raymond

Jerome, Raymond, Employee

  • 140 Points 100 badge 2x thumb
Troubleshooting XSR VPN configurations are best pursued through the GTAC Service Case process. I have sent you an email from the service case, please reply to that with the configurations of the routers involved.

Best Regards,

Raymond