Zebra ap 7622, ge1 port disabled. How do I factory reset the device?

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Sudip Sarkar

Sudip Sarkar

  • 130 Points 100 badge 2x thumb
Please connect to the Console port and type

# erase startup config
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
Thank you. I will try
Photo of Timo

Timo

  • 3,210 Points 3k badge 2x thumb
Connect via serial (19200 or 115200) and login with:
user: reset
password: FactoryDefault

was the AP adopted by a controller? If yes, it should reboot 10-15 minutes and come up with a config error.
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
No. It is not adopted to controller. 
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
I tried to using console cable with "reset" credential, but it given error "login failure"
Photo of Timo

Timo

  • 3,210 Points 3k badge 2x thumb
This works only 15 minutes after the boot. Try to reboot the AP and than login.
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 5,650 Points 5k badge 2x thumb
Hi Gihan,

please find GTAC knowledge article describing How to factory default WiNG devices

Also, be careful configuring VLANs and LAN ports via SwiftUI as described in this thread

Regards,
Ondrej
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
Thank you
Photo of Christoph S.

Christoph S., Employee

  • 3,450 Points 3k badge 2x thumb
Hello Gihan,

Here's another link with instructions on resetting the AP: How to factory reset the config of a WiNG AP from CLI 

Regards,

Chris
Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
Thank you
Photo of Daniel Mejia

Daniel Mejia, Employee

  • 1,056 Points 1k badge 2x thumb

Hi Gihan,

To reset the AP7622 to factory settings you will need console access, and log in with the following credentials:

User name: restore

Password: FactoryDefault

You can find more information on the following GTAC article:

How to factory reset the config of a WiNG AP from CLI 


Regards,

Daniel.

Photo of Gihan

Gihan

  • 470 Points 250 badge 2x thumb
Is that user name is correct..? I heard username is "reset". K I will try with this. Thank you.
(Edited)