Solved

AP410C PoE requirement

  • 13 August 2021
  • 2 replies
  • 31 views

Hello All

The AP410C requires 802.3at Power however if you turn off a radio ( or two radios) will it operate with 802.af PoE ?

We are seeing the AP’s come up ( 802.3af) , broadcast SSID’s but then a minute later it will stop broadcasting. Am wondering if this has anything to do with the PoE ?

Any suggestions appreciated !

icon

Best answer by Ash Finch 16 August 2021, 16:31

According to the power profile on this page: https://docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap410c.htm it decreases the capabilities, tx powers etc but should still operate. Probably not recommended to do so though.

View original

2 replies

Userlevel 4

According to the power profile on this page: https://docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap410c.htm it decreases the capabilities, tx powers etc but should still operate. Probably not recommended to do so though.

Thanks for the help Ash

Reply