Header Only - DO NOT REMOVE - Extreme Networks
Solved

Add devices to ExtremeCloud IQ issue


 

two methods for adding a device to ExtremeCloud IQ : Quick Add and Advanced On-boarding is very slow.

I have captured traffic from our iq on premise, it seem like controller  can’t contact to ExtremeIQ services with the ip address 44.234.22.92 and tcp port 80.

please help me to check that

icon

Best answer by Paul Wang 1 July 2020, 05:28

The FIREWALL CONFIGURATION GUIDES for IQVA has just been updated to include port 80 discussed here.

https://extremecloudiq.com/support/on-premises.html

View original

4 replies

Userlevel 2

The issue is not reproducible now. Can you try again? 

The issue is not reproducible now. Can you try again? 

 

everything works fine now. our controller is now requesting to IP: 3.234.248.30-31 instead.

 

Userlevel 2

Great to hear the good news. 

Any of the following IP addresses could be used by IQVA to query GDC when adding SNs. 

34.253.190.192 ~ 34.253.190.255    
18.194.95.0 ~ 18.194.95.15
3.234.248.0 ~ 3.234.248.31
44.234.22.92 ~ 44.234.22.95

See the linked guide below for the details. 

https://extremecloudiq.com/support/on-premises.html

Port 80 is currently missing on the guide obviously. I will try to report this and have this guide updated.

Userlevel 2

The FIREWALL CONFIGURATION GUIDES for IQVA has just been updated to include port 80 discussed here.

https://extremecloudiq.com/support/on-premises.html

Reply