Here are the new articles that were published January 22 - January 28, 2017 in GTAC Knowledge
Sunday, January 22, 2017:
Monday, January 23, 2017:
ELRP detects loop between WiNG wireless controllers in an active/active cluster
Blacklist MAC Import is creating a failed GUI page
Configuring QinQ with 800-series
K series line card unexpectedly restarted with Stnham[x.tLcIntr]INT hmmr_pcie_core_status_int_pcie_err_bad_dllp
Cloud APs not updating with IP address in portal; Access Points showing RED status
Traffic drops between the CEP ports in the service vman when CEP egress filtering enabled.
Tuesday, January 24, 2017:
C5210 - reboot the controller and lose http GUI access, even to the out-of-band management port
What is the Best-Practice Configuration between the S-Series and another router on a VLAN with no Other Devices?
What APs support Captive Portal Redirect B@AP?
How To Configure WLAN Service For NAC External Captive Portal Redirect
Traffic not forwarded to secondary path after failover when LSP is added to VPLS
Wednesday, January 25, 2017:
What is the variable for system name within Netsight email notifications?
Clients with connection issues on the 2.4 Radio using AP3805 and AP3801.
Where can I Find Information About The Transition of Support for the Wireless WiNG From Zebra to Extreme Networks?
After the upgrade to 10.11.05, the Radio 1 (5 GHz channel) on the AP3965i Access Points were stuck in a scanning state.
Why does the text description in a rule not match the rule definition?
How long does Extreme Management Center retain collected data
Incompatibility between 100FX Gbics 10063 and Summit
Multicast packets drop on enabling diffserv examination, with hardware BFD assist.
Jumbo-frame is disabled on master port after reboot when ports are partitioned.
Which ports are used for deploying secure tunnel with firewalls?
Thursday, January 26, 2017:
When installing a new line card in a K10 chassis the card does not synchronise in one slot
How To Check the State of a BGP Peer on the S-Series
K-Series: KT2006-0224 line card not delivering PoE to newly connected ports
Time stamps on syslog events not correct in Netsight
IGMP report packets are not processed when received on VMAN CEP port.
Which EXOS firmware supports more than one LSP OSPF area ?
WDS AP3865 resets and need long in order create the WDS link back
Unify WL3 - Ascom i62 not able to communicate after upgrade to v9.21.15 from 9.21.14
BFD session goes down when VPLS is used and cvid is removed from CEP vlan
Friday, January 27, 2017:
How to test email functionality in Extreme Management Center
Saturday, January 28, 2017: