Header Only - DO NOT REMOVE - Extreme Networks

Access Point not detected in netsight


Access Point not detected in netsight but controller and my other devices are

detected.
please help me how to configure in netsight

6 replies

Userlevel 7
Was it working before and now it shows 0 or is that a new installation?

Could you check whether you've configured all required steps, here a post to my notes...
https://community.extremenetworks.com/extreme/topics/using_netsight_5_to_manage_wireless_controllers

I'm not sure how OneView get's that information it could be via the controller CLI - so make sure that the CLI credentials are correct.

-Ron
YES ,NEW INSTALLATIONS
Hello Sir
my issue not controller, controller is detected ap not detected

Userlevel 7
The controller is managed via Netsight Console BUT as the APs are not real devices (at least not in Netsight Console) you'd need to configure CLI access from Netsight to the controller.

Netsight will ssh to the controller to pull the AP status information.
I've tried it in my lab, if I use a wrong password in my CLI profile OneView will not show the AP status/count.

So follow the instructions to make sure Netsight could access the controller via ssh..
https://community.extremenetworks.com/extreme/topics/using_netsight_5_to_manage_wireless_controllers

-Ron
Userlevel 7
Reference: https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-displays-SYNC-ERROR-CLI-AUTHENTI...
thanks

Reply